Authentication
contact us
Service Hotline:
0574-27880858
Ningbo KPL Technology Co., Ltd.
Mr.Chen :18668299419
Mr.Huang :13056889909
Mr.Wang :15067891153
Miss Geng :15088816300
Miss Hu : 15906559403
Advice or complaint:0574-27880028
USA:+1 615 674 7606
1 energy saving certification
release time :2021-12-24 15:34:52
application for Certification of enterprises and their products must meet the following conditions :industrial and commercial enterprises within the territory of the People ' s Republic of China shall be issued by the competent department of the Business License for Enterprise as a Legal Person , the overseas company should hold a relevant mechanism of certificate of registration .
Audit of the quality system meets the ISO 9002 1994 " Quality System Production , installation and service of quality assurance mode standard or equivalent ISO 9002 1994 the requirements of national standards and China Committee for Certification Center of supplementary requirements .The product may be issued by the State for the conduct of the Committee for Certification list range of products .
a limited number of products that have a production license , quality is stable and reliable , can be manufactured in batch production , sufficient supply capacity ,
includes the pre - sales , after - sales service and spare parts , replacement of the supply .Product according to the Center of China Committee for Certification of product standards or technical requirements in production . Energy - saving Product Certification Center of China and the performance of the fuel - efficiency standards or the technical requirements set forth the provisions of the
a the preparation of materials ,
application for Certification of enterprises shall fill in " Application for Certification " , along with the following materials shall be submitted to the Office of the China Committee for Certification Center ( hereinafter referred to as the Office ) :
1 ) Duplicate of business license or registration certificate ( photocopy of the applicant as to the audited party group is different , the applicant shall provide the certification materials ) ;
2 ) The registered trade mark ;
3 ) in charge of production license for the copies when required ;
4 ) stable quality and mass production ability of the materials ( e.g . bulk material may be manufactured according to the identification ) ;
5 ) product standard ( refer to the product standards , such as the implementation of the national standard does not have to be provided ) ;
6 ) Electrician certificate product safety certification or safety test report ; ( as part of national safety supervision and administration of mandatory product catalog ) authentication
7 ) product performance test reports and key controlled parts performance inspection report ;
8 ) Factory Quality Manual ;
9 ) when needed , CECP as to any of the other relevant information .
at the same time submit the following documents for reference :
1) Quality System Certificate ( if it has been authenticated ) .
2Product quality certificate ( copy ) if it has been authenticated ) .
3laboratory accreditation ) .
Second , acceptance of the application
Party ' s written application and relevant material when it is ready , CECP Yu 10working days as of the completion of the application and relevant materials to the examination of compliance with the requirements of " Notice of Application Acceptance conservationproduct authentication " , the given authentication item numbers . The application form and relevant materials . If the case is not sufficient , CECP with applying for the contacts ( telephone , fax or other means ) , which is specified in the notification 30days to supplement relevant materials or carry out corresponding rectification and , when necessary , " supplementary materials " , until the application and the relevant material specification . If the application fails to request in 30Supplementary days / improve material required no explanation and illustration , the application is considered to be a party to withdraw its application .
the application shall sign the energy conservationproduct authentication in accordance with Contract Law of the People "
along with the " Notice of Application Acceptance Committee for Certification " , CECP will also issue the Certification Agreement ( in duplicate ) to determine the scope of certification ( product name , the party being audited / manufactory , trade mark ) product , factory audit and products completed the sampling date , and authentication of the claim for the cost of opportunity , responsibility and obligation of both sides . notification of the accreditation fees while the budget . As for the contents of this Contract and authentication cost budget this CECP implementation of factory certification audit before signing the Contract . Contract shall be valid for a period of four years , if the authentication ( authentication range including the product type , manufacturer , etc . ) do not change , expanding each time authentication is no longer agreement contract .
III . Quality System Audit
According to GB / T19002 - 1994 " Quality System
CCEC / T03 - 2000 " Certification Quality System Requirements "
audit of quality manual , procedures and related supporting documents .
IV . Product Inspection
and the X - ray inspection apparatus and inspection agencies received the office of " Management Measures for Energy Conservation Product Certification Assignment , according CECP / P09 - 1999 " If an enterprise passes the review process " and CECP / P10 - 1999 " Certification Inspection Control Procedures " of the relevant regulations of the respective audit and inspection work . qualified in the inspection by the China Committee for Certification Centre issued certificates .
, an authentication registration fee :
Application fee : 2000Yuan ;
examination fee : 3000Yuan man - days ; RMB 18000 ( Press , which is calculated in accordance with the number of people of , factory general review is 6human )
Evaluation and registration : 3000Yuan ;
Annuities : 5000Yuan ;
product inspection by the inspection organizations as required ; ( inspection fee for street lamp 22000Yuan / Model )
preliminary examination fee : review ' 50 % ( not required ) ;
Standard confirmation fee : 2000meta - ( not required ) ;
CQC Certification fee : three models , 35000yuan
announcement fee ( voluntary participation ) .
Second , supervision and examination fee
supervision and examination fees : initial examination fee ' 30 % ;
supervision and inspection by the inspection agency fees .
Third , the review fee :
examination fee ' 80 % ;
Other charging items and charging standards and the primary authentication being the same .
management of certificates logo
1 . the scope of application
With a view to enhancing the use of the certificate and mark management , to ensure that the certification certificate and mark correctly use , maintain the lawful rights and interests of the certificate holder , while maintaining CSC and authentication CSC the credibility of the State .
This document applies to CSC By registration and authentication with the authentication certificate and permit the use of marks registered organization .
2 . reference documents
- CNAB AG01 - 2004 Authentication Certificate Management Implementation Guide
- CNAB AR04 - 2004 The approval mark and the mark of international recognition of the use of the logo of rules
CSC / K02 - 2005 the authentication approval , maintenance , expansion , reduction , suspension and revocation of provisions
3 . work program
3 . 1CSC promulgate certification signs graphic style , and by the certification organization issued an approval certificate . Supervision and Management Commission of the use of the certificate and mark .
3.2the authentication certificate is found to meet the certification requirements of statutory documents .
3.3marks shows already meets the certification requirements of graphic identification . energy - saving product certification marks and certification marks are blue " Section " word mark , eco - friendly products certification and quality management system certification marks also CSC flag ) as a color graphic , wherein the energy - saving , water saving and eco - friendly products certification organized by the State Administration for Industry and Commerce ( SAIC ) registered by the Trademark Office to become the national energy saving / Water - saving / environmental protection certification logo , the quality management system certification marks registered by CSC implementation of quality management system certification logo . See Appendix A , B , C .
3.4Provisions on the use of certifications .
3 . 4 . 1 certification by the certification bodies accreditation of China ( hereinafter referred to as : " CNAS " ) is authorized , CSC uniformly printed .
3.4 . 2 Certificate authentication is adopted in which , in the form of a Chi - nese and English , when English - language content on the dispute , the Chinese version shall prevail . If the overseas enterprise address cannot be translated into Chinese , it may be possible to use the English or the local postal code can identify letters or style of writing .
3.4 . 3 certificate of mosaic " Section " word mark / Environmental protection product certification , the certificate shall include the following :
( a ) ( Chinese ) Certificates for Certification Certificate / Water - saving Product Certification in China / China ' s environmental protection certification certificate )
b ) Accreditation certificate number
c ) The registered organization name
d ) the name and address of the manufacturer
e ) Name and address of manufacturer ( if that includes several factories , the certificate must be stated clearly in each address of the factory )
f ) Certification standards and supplementary technical requirements
g ) falls under the product name , specification and necessary technical parameters
f ) Product certification models
g ) Date of issue , renewal and expiry date of the starting and ending date
h ) Name of administration or authorized - person signature
i ) State - sanctioned flag and CSC Through national registration numbers approved ( approval project )
3.4 . 4 Quality management system certificate mosaic " CSC " Graphic signs , whose contents shall include :
Name of certificate ( certificate awarded )
The registered organization name
According to the standards and quality management system / or other reference document number with the number of generations
Products covered by quality management system certification ( or service ) category and is involved in the process
where appropriate , the corresponding products which serve as the basis for laws and regulations and product standards or other documents
Date of issue , renewal and expiry date of the starting and ending date
registration number
the names and flag
the authentication mechanism of the seal or signature of the authorizer
National accreditation mark and logo ( the international mutual recognition project )
3 . 4 . 5 the authentication certificate and its copy shall have equal legal effect . Certificate has no legal effect .
3 . 4 . 6 Type - approval certificate in respect of the holder of the product advertisement , promotional material on the product using the certificate and mark .
3 . 4 . 7 certificate holders in engineering bidding , appearance of substitute products , the certificate shown .
3.5 Products and Use
3 . 5 . 1 " Section " Energy saving is a sign . / Water Saving Product Certification mark , the mark of a reference color is blue , the Chinese color system and Analysizing ( State Bureau of Technical Supervision approval , the national standardization technical committee in color ) are numbered as ( tone H ) 5PB ; The brightness ( V ) 5 ; The chroma ( C ) 12 . Environmental protection product certification for color graphics .
3.5 . 2 the holder of the certificate must be in proper appearance of the product or product packaging on their minimum marks in favor of consumer identification , and national quality and technology supervision department , relevant department and CSC of market supervision .
3.5 . 3 The CSC certified product , from the effective date of the certificate of authentication , the authentication of the holder of the certificate may be certified as such by the appearance of the product , nameplate , package , manual and factory certificate on the authentication using a flag word .
3.5 . 4 The registered organization may be according to actual needs , the use of adhesive , molding , etching , printing , metal plates such as any one or more forms of explicit certification marks .
3 . 5 . 5 certificate holders will be required for the use of the certification scheme ( specific site ) and in the form of a report CSC for the record , approval of cnca . See Annex D .
3.5 . 6 Adhesive sticker for anti - forged mark is a certification mark , by the CSC unified pattern design and making , certificate holders may be needed to CSC Subscription .
3.5 . 7 The CSC authorization , product certification certificate holders may be made , but its pattern , size must comply with Appendix A provisions , in accordance with the standard graphic scaling , accurate size , without deformation , and should be directly below the flag indicating the registration number of the certification .
3.5 . 8 As the particularity of the products subject to the restrictions , not in the proper position to affix a label stating the product certification authentication or registration , subject to CSC approval . As with special requirements for the certification of products marking a text annotation must be used before , CSC examination . No person is allowed to use a text annotation .
3.5 . 9 direct printing ( ) on the packaging of the Products which color should be printed on the background of significant differences , in addition to using the original color of the mark , which is printed with black marks , such as using molding , etching , metal plate form , which may vary depending on the material of the primary colors .
3.6quality management system certification and the use of the logo
3.6 . 1 Only certified quality management system certification organizations that registered in the authentication certificate is in force . do not in any way the transfer , sale , transfer , borrow or fraudulently . You must use the names and organizations that are put together , and the certificate number of the markings in the vicinity .
3 . 6 . 2 As in a certain way makes that clear " A process for producing the product of the quality management system adopted by the CSC According to GB / T19001 - 2000 Standard of Certification " then , the flag may be used in product packaging ( and would be reasonable to assume that it won ' t arrive until the end - user ' s hand ) and the relevant documents and publications in the country and in relation to the certification of the occasion .
3.6 . 3 . quality management system certification marks on the product label is not allowed , nor could be mistaken for a qualified product is used in such a way .
3 . 6 . 4 Whatever the reason , as long as organizations stopped paying relevant expenses prescribed or revoked authentication certificate , a receipt CSC immediately for the utilizations of certification letters and signs , bearing the approval mark and for the destruction of all of the material .
3 . 6 . 5 In the utilizations of certification letters , certification organizations shall cease to use the certification certificate and mark - to - be - CSC Moratorium on the use of the certificate revocation notification , before continuing to use the certification certificate and mark .
3 . 6 . 6 No certification in the certification scope of business of all kinds of irrelevant and to increase awareness of the media on misleading propaganda .
The registered organization from using the mark , the mark pattern must be accurate , strict according to CSC Publication of the mark pattern , color , enlarged or reduced in proportion . pattern approval mark of the proportion of various parts of the Appendix C shown . should ensure that they do not use misleading manner using the authentication certificate , marks and report of any part .
3 . 6 . 7 the certification certificate and mark may be made by the organizations that needed to be used simultaneously or used separately .
3.7State - sanctioned international flag identification of use
3 . 7 . 1 by national accreditation bodies , quality management system authentication mechanism allows the use of the flag ; The international mutual identification is the International Accreditation Forum ( IAF ) through which is admitted by confirmation of mutual recognition of identification .
3.7 . 2 Center obtained the Quality Management System certification organizations may use the national and international mutual accreditation logo identification .
the national accredit marking . The use of the scope , applications and quality management system certification marks are the same . When used together , the national accredit marking must be parallel to the CSC certification mark to the right .
The international mutual identity authentication mechanism is allowed only in the quality management system certification certificate is printed , the certification organizations by publicity , show the certificate introduced international mutual identification is not allowed in the quality management system certification certificate outside the range of use in other forms of international mutual identification .
3.8 Management requirements
3 . 8 . 1 The registered organization may be established using the certificate and mark management system . a person for the certificate and mark the correct responsible use , careful manner and used for recording . The record shall include the certificate number , the product specifications , the annual output and sales of , the use of the flag , the number . annually in writing to the CSC debrief and accept CSC - Check .
3.8 . 2 The registered organization shall keep properly the authentication certificate , in case of loss , damage . Any unit / individual shall forge , alter , lend , lease or transfer the authentication certificate . product certification certificate and mark shall be used only for the purpose of authentication in the certificate of the production site for the production of such Products .
3.8 . 3 In the authentication of the certificate validity period every year CSC its authentication certificate whose validity is confirmed qualified item by item , and may continue to use the certificate and mark . certification of maintenance , replacement , extend , suspend or recover , and withdrawal , and thus of the flag used by and are made corresponding decision , in accordance with the authentication approval , maintenance , expansion , reduction , suspension and revocation of provisions of the relevant provisions of the People ' s Republic of China . Certificate revoked after the repeal of the old registration , no longer using it .
3.8 . 4 Where the misappropriation , misuse and unauthorized authentication certificate and logo , will be prosecuted in accordance with national law on liability